D-Link NetDefend DFL-260E Reference Manual Download Page 51

Page: 51 / 328

(Default: all)

2.2.30. ha

Show current HA status.

Description

Show current HA status.

Usage

ha [-activate] [-deactivate]

Options

-activate

Go active.

-deactivate

Go inactive.

2.2.31. hostmon

Show Host Monitor statistics.

Description

Show active Host Monitor sessions.

Usage

hostmon [-verbose] [-num=<n>]

Options

-num=<n>

Limit list to <n> entries. (Default: 20)

-verbose

Verbose output.

2.2.32. httpalg

Commands related to the HTTP Application Layer Gateway.

Description

Chapter 2: Command Reference

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Brands by name

Popular brands

D-Link NetDefend DFL-260E, Reference Manual

Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Brands by name

Popular brands