D-Link NetDefend DFL-260E, Reference Manual

Page: 181 / 328

3.44. GotoRule
Description
A goto rule specifies what IP rule set to match IP rules in for traffic that matches the specified
filter criteria.
Properties
Index The index of the object, starting at 1. (Identifier)
Name Specifies a symbolic name for the rule. (Optional)
Action Goto Action. (Default: Goto)
RuleSet Where to redirect rule lookup.
SourceInterface Specifies the name of the receiving interface to be
compared to the received packet.
DestinationInterface Specifies the destination interface to be compared
to the received packet.
SourceNetwork Specifies the sender span of IP addresses to be
compared to the received packet.
DestinationNetwork Specifies the span of IP addresses to be compared
to the destination IP of the received packet.
Service Specifies a service that will be used as a filter
parameter when matching traffic with this rule.
Schedule By adding a schedule to a rule, the firewall will only
allow that rule to trigger at those designated times.
(Optional)
LogEnabled Enable logging. (Default: Yes)
LogSeverity Specifies with what severity log events will be sent
to the specified log receivers. (Default: Default)
Comments Text describing the current object. (Optional)
Note
If no
Index
is specified when creating an instance of this type, the object will be placed
last in the list and the
Index
will be equal to the length of the list.
Chapter 3: Configuration Reference
181