2.64.16. zonedefense_table_exhausted (ID: 03800016)
Default Severity
Log Message
Unable to accommodate block request since free space in Zone
Defense table is exhausted.
Explanation
Number of free row in Zone Defense table is 0. Can not block more
hosts.
Gateway Action
no_block
Recommended Action
Unblocking of the host can make a room in Zone Defense table.
Revision
1
Parameters
switch
2.64.17. zonedefense_disabled (ID: 03800017)
Default Severity
Log Message
ZoneDefense is disabled on <switch>. The system will try to enable
it.
Explanation
The switch responded that it has the ZoneDefense feature disabled.
System will try once to enable it.
Gateway Action
enabling_zonedefense
Recommended Action
None.
Revision
1
Parameters
switch
2.64.18. zonedefense_enabled (ID: 03800018)
Default Severity
Log Message
ZoneDefense has been successfully enabled on <switch>.
Explanation
The system has successfully enabled ZoneDefense on the switch. No
manual action is needed.
Gateway Action
getting_acl_number
Recommended Action
None.
Revision
1
Parameters
switch
Chapter 2: Log Message Reference
649
Summary of Contents for NetDefend DFL-260E
