2.64.13. timeout_saving_configuration (ID: 03800013)
Default Severity
Log Message
Timeout to save configuration on <switch>.
Explanation
Several attempts to save the configuration in the switch has timed
out. No more attempts will be made.
Gateway Action
None
Recommended Action
Verify that the firewall is able to communicate with the switch.
Revision
1
Parameters
switch
2.64.14. zd_block (ID: 03800014)
Default Severity
Log Message
ZoneDefense blocking host <host>. Alert Type: <type>.
Explanation
A configured action of type [type] has triggered ZoneDefense to
block the host [host] at the configured ZoneDefense switches.
Gateway Action
block
Recommended Action
Unblock the specified host using the ZoneDefense status page to
allow the host to regain access to the network.
Revision
1
Parameters
type
host
2.64.15. mac_address_blocking_not_supported (ID: 03800015)
Default Severity
Log Message
Unable to accommodate block request since MAC address blocking
is not supported.
Explanation
This switch implements universal MIB that does not support MAC
address blocking.
Gateway Action
no_block
Recommended Action
None.
Revision
1
Parameters
switch
mac
Chapter 2: Log Message Reference
648
Summary of Contents for NetDefend DFL-260E
