Default Severity
Log Message
Did not send a RADIUS Accounting START request. Accounting has
been disabled
Explanation
The unit did not send an Accounting-Start event to the Accounting
Server. Accounting features will be disabled. This could be a result of
missing a route from the unit to the Accounting Server.
Gateway Action
accounting_disabled
Recommended Action
Verify that a route exists from the unit to the RADIUS Accounting
server, and that it is properly configured.
Revision
2
Context Parameters
2.62.15. user_timeout (ID: 03700020)
Default Severity
Log Message
User timeout expired, user is automatically logged out
Explanation
The user is automatically logged out, as the configurated timeout
expired.
Gateway Action
user_removed
Recommended Action
None.
Revision
2
Context Parameters
2.62.16. group_list_too_long (ID: 03700030)
Default Severity
Log Message
User <username> belongs in too many groups, keeping the 32 first
groups
Explanation
A username can only be a member of a maximum of 32 groups. This
username is a member of too many groups, and only the 32 first
groups will be used.
Gateway Action
truncating_group_list
Recommended Action
Lower the number of groups that this user belongs to.
Revision
1
Parameters
username
Chapter 2: Log Message Reference
624
Summary of Contents for NetDefend DFL-260E
