2.29. IP6IN4
These log messages refer to the IP6IN4 (6in4 Tunnel Events) category.
2.29.1. failed_to_setup_6in4_tunnel (ID: 07800001)
Default Severity
Log Message
Failed to setup open tunnel from <local_ip> to <remote_ip>
Explanation
Unable to setup 6in4 tunnel with endpoint.
Gateway Action
drop
Recommended Action
Check CONN usage and local routing.
Revision
1
Parameters
local_ip
remote_ip
2.29.2. 6in4_resolve_successful (ID: 07800002)
Default Severity
Log Message
6in4 tunnel <iface> resolved <remotegwname> to <remotegw>
Explanation
The 6in4 tunnel succesfully resolved the DNS name of remote
endpoint.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
iface
remotegwname
remotegw
2.29.3. 6in4_resolve_failed (ID: 07800003)
Default Severity
Log Message
6in4 tunnel <iface> failed to resolve <remotegwname>
Explanation
The 6in4 tunnel failed to resolve the DNS name of the remote
endpoint.
Gateway Action
None
Recommended Action
Make sure you have configured the DNS name of the remote
endpoint and the DNS servers correctly.
Chapter 2: Log Message Reference
317
Summary of Contents for NetDefend DFL-260E
