2.10. BUFFERS
These log messages refer to the BUFFERS (Events regarding buffer usage) category.
2.10.1. buffers_flooded (ID: 00500001)
Default Severity
Log Message
The buffers were flooded for <duration> seconds. Current usage is
<buf_usage> percent
Explanation
The unit was temporarily out of buffers for a period of time. This
could be a result of a period of heavy network traffic load.
Gateway Action
None
Recommended Action
If this is a reoccurring event, try increasing the number of
HighBuffers.
Revision
1
Parameters
duration
buf_usage
2.10.2. buffers_profile (ID: 00500002)
Default Severity
Log Message
Buffer requested by <reason> used at total of <duration> ticks and
was touched <numstop> times
Explanation
A buffer associated with a profiling request has been identified. This
log message will only be generated by special built firmware for the
purpose of debugging.
Gateway Action
None
Recommended Action
Nothing.
Revision
1
Parameters
numstop
duration
reason
Context Parameters
Chapter 2: Log Message Reference
208
Summary of Contents for NetDefend DFL-260E
