39
D-Link DNR-322L User Manual
Section 3 - Configuration
For Windows, you can insert the CD and click NVR Search Utility to run another useful setup tool. For Mac, please go on to
Page 41. When first powered on, during the initial boot sequence, the device will wait to be assigned an IP address via DHCP.
If it does not receive a DHCP-assigned IP address the Auto-IP process will assign a 169.254.xxx.xxx address to the device. If
you want to change the IP address before logging in or are unable to connect to the NVR IP address, you can use the NVR
Search Utility provided on the product CD to locate the device on your network and make any needed changes.
D-Link NVR Search Utility
Network Video
Recorder:
Refresh:
Configuration:
LAN:
Receive DHCP:
Apply:
Drive Mapping:
Available Drive
Letters:
About:
Exit:
The D-Link NVR Search Utility displays any NVR devices it detects on
the network.
Click to refresh the device list.
Click
Configuration
to access the Web-based configuration of the
NVR.
Configure the LAN Settings for the NVR.
Select
Enable
to use DHCP for your LAN IP settings, or
Disable
to use
static IP.
Click
Apply
to save and activate the changes to the LAN Settings.
Volumes available for mapping are displayed here.
Select an available drive letter. Click
Connect
to map the selected
volume. Click
Disconnect
to disconnect the selected mapped volume.
Click
About
to view the software version of the NVR Search Utility.
Click
Exit
to close the utility.
Windows