mydlink network Video recorder
dnr-322l
Simplified SurVeillance Video management
D-Link Corporation
no. 289 xinhu 3rd road, neihu, taipei 114, taiwan
Specifications are subject to change without notice.
d-link is a registered trademark of d-link corporation and its overseas subsidiaries.
all other trademarks belong to their respective owners.
©2011 d-link corporation. all rights reserved.
release 01 (august 2011)
tecHnical SpecificationS
Hardware SpecificationS
StandardS
ieee 802.3/u/z
auto mdi/mdi-x
Sata i, ii
Hard diSk
1
Hard disk control & management via pc
reformat disk
raid 0
2
raid 1
2
jbod
two reSet modeS
reset firmware gui button
Hw reset button (hold for 5 seconds)
flaSH rom
128 mb
ram
256 mb ddr ii
network interface
gigabit ethernet lan port (10/100/1000 mbps)
i/o portS
rj45 port
dc-in jack
uSb port for upS status update (optional)
power adapter
dc 12V/4 a
reSet button
reset to factory default
Security
device lock hole
power conSumption
max. power consumption: 25.20 w
Standby state max. power consumption: 0.23 w
dimenSion (w x d x H)
115 x 146.4 x 178.5 mm
(4.53 x 5.76 x 7.03 inches)
weigHt
0.875 kg (1.93 lbs)
operating temperature
0˚ to 55˚ c (32˚ to 131˚ f)
Storage temperature
-20 to 70 ˚c (-4 to 158 ˚f)
Humidity
operating: 5% to 90% (non-condensing)
certificationS
ce
fcc
roHS
package contentS
dnr-322l 2-bay mydlink nVr
power adapter
ethernet cable
Quick installation guide
power cable Holder
cd-rom with:
Software
product documentation
your network Setup
1
Hard disks not included.
2
raid 0 and raid 1 mirroring requires the use of two internal Sata drives. to avoid data incompatibility in raid 1 operation, use identical Sata drives from
the same manufacturer. formatted drive capacity for raid 1 operation is dependant on the drive capacity of the lowest-sized drive. Some older generation
Sata drives may not be compatible. for a list of Sata drives that have been tested to work with the nVr, visit the d-link support website.
