67
D-Link DNR-312L User Manual
Section 5 - Applications
Insert the CD, go to the CD directory, then enter the Mac Utility folder. Click the NVR Search Utility file to run this useful setup
tool. When first powered on, during the initial boot sequence the device will wait to be assigned an IP address via DHCP. If it
does not receive a DHCP-assigned IP address the Auto-IP process will assign a 169.254.xxx.xxx address to the device. If you
want to change the IP address before logging in or are unable to connect to the NVR IP address, you can use the NVR Search
Utility provided on the product CD to locate the device on your network and make any needed changes.
Network
Video
Recorder:
Refresh:
Configuration:
LAN:
Receive
DHCP:
Apply:
About:
Exit:
The D-Link NVR Search Utility displays any NVR devices it detects on
the network.
Click to refresh the device list.
Click
Configuration
to access the Web-based configuration of the NVR.
Configure the LAN Settings for the NVR.
Select
Enable
to use DHCP for your LAN IP settings, or
Disable
to use
static IP.
Click
Apply
to save and activate the changes to the LAN Settings.
Click
About
to view the software version of the NVR Search Utility.
Click
Exit
to close the utility.
D-Link NVR Search Utility - Mac
Select the device from the list and click
Configuration
. This will launch the computer’s default web browser and direct it to
the IP address listed for the device. Make sure the browser is not configured to use a proxy server.