55
D-Link DNR-312L User Manual
Section 4 - Configuration
If the NVR is malfunctioning or crashes unexpectedly, click
Restart
on the NVR. Restarting the NVR will take about ninety seconds.
This will shut down the NVR.
This will reset all settings back to the factory defaults.
All the configurations can be saved as a file to the specified location.
Click
Save
to save the file.
You can restore the configuration file after resetting to factory
default file. Click
Browse
to select the configuration file and restore
it by clicking
Load
.
When the administrator enters all the Setup pages (except the
Live Video and Playback Page), the NVR will keep track of the idle
time when the user is not active. If this inactive period exceeds the
specified limit, the user will be logged out and will have to log in
again for security purposes. You can change the idle time limit here.
Enable or disable the buzzer. This is an audible alarm that sounds off
when an event is triggered.
System
System Restart:
System
Shutdown:
Restore to
Factory Default
Settings:
Save
Configuration
Settings:
Load
Configuration
Settings:
Idle Time
(Minutes):
Buzzer:
You can save the NVR configuration to a file and restore it when necessary,
such as restarting the NVR in the event of a crash. Reset the NVR to restore
all configurations to factory default. Click
Save
to apply your changes.