41
D-Link DNR-312L User Manual
Section 4 - Configuration
DHCP:
Static IP:
IP Address:
Subnet Mask:
Gateway IP
Address:
DNS1:
DNS2:
Enable
PPPoE:
DHCP Server:
Enable Bonjour:
Select this connection if you have a DHCP server running on your network
and would like a dynamic IP address to be automatically updated to your
NVR.
You may obtain a static or fixed IP address and other network information
from your network administrator for your NVR. A static IP address will simplify
access to your NVR in the future.
The fixed IP address.
The default value
255.255.255.0
is used to determine if the destination is
in the same subnet.
The gateway forwards frames to destinations in a different subnet. Invalid gateway settings may cause the failure of transmissions
to a different subnet.
Primary domain name server that translates names to IP addresses.
Secondary domain name server to backup the primary one.
Enable this setting if your ISP (DSL service) is using PPPoE. You may already have a Username and Password provided by your ISP,
or you may need to contact your ISP. The connection status will be determined automatically by the system.
Enable or disable the DHCP server. If your network doesn’t have a DHCP server, enable this feature for easier local network setup.
Enable the Bonjour service to allow users to discover the DNR-312L with Apple devices.
Setup
Network
Network Setup
Network Setup lets you configure how you connect the NVR to the Internet.