7.4.3.
Auto-scan Mode
There are two auto-scan modes, please refer section
7.3.1 Setup in
OSD – Scan Mode
to set up the auto-scan mode.
¾
Scan all computers which are power on.
¾
Scan all computers which are marked for auto-scan.
7.4.4.
Auto-scan Time Interval
The auto-scan time interval of each port displayed can be adjusted by
pressing
<F1>
from the OSD main menu. Please refer section
7.3.2 Setup
in OSD – Scan Time
.
7.5.
Console Lock in OSD: <F3>
If the security mode is enabled in OSD mode (by pressing
<F5>
in OSD mode,
please refer section
7.7 Security Setup in OSD
). You can logout to lock the
console by pressing
<F3>
In OSD mode. The
Console Lock Banner
will be
shown on the screen.
Figure 23: Console Lock Banner
The KVM will be locked until an authorized user logs in.
Figure 24: Unlock window
Note: When outside of OSD mode you can also log out to lock the console via
hotkey using
<Scroll Lock>
→
<Scroll Lock>
→
<H>
→
<Enter>
.
Please refer section
6.7 Console Lock
.
Note: If you forget the password, the only way to permanently
disable the security function is to key in a universal password to
unlock the KVM. You need to key in this unlock password to unlock
the KVM, and then you can reinitialize the system. Please contact
your agency/distributor to obtain the universal password.
26
Summary of Contents for KVM-440
Page 1: ...D Link KVM 440 KVM 450 8 16 Port Combo KVM Switch User Manual Version 1 00...
Page 7: ...7...
Page 13: ...Figure 10 Cascade chaining 13...
Page 14: ......