background image

    

 

 
 
 
 
 
1.  If you purchased this router to share your high-speed Internet connection with other 

computers, you must have either an Ethernet-based Cable or a DSL modem with 
an established Internet account from an Internet Service Provider (ISP). 

2.   It’s best to use the same computer that is connected to your modem for configuring 

the DI-604+ router. The DI-604+ Broadband Router acts as a DHCP server and 
will assign all the necessary IP address information on your network. 

See 

Appendix at the end of this Quick Installation Guide or the Manual on the 
CD-ROM for setting each network adapter to automatically obtain an IP 
address.

 

Check Your Package Contents 

These are the items included with your DI-604+ purchase: 

 

              
 
 
 
 
 
 
 

          

 

          

  

If any of the above items are missing, please contact your reseller. 

©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective 
holders. Software and specifications subject to change without notice. 

This product can be set up using any current 
web browser, i.e., Internet Explorer 6x, 
Netscape Navigator 7x. 

DI-604+ 

Express EtherNetwork™ 

 

Broadband Router 

 

• DI-604+ Broadband Router 
 
 
 
• CD-ROM (containing Manual and Warranty) 

 
 

 
• Ethernet (CAT5 UTP/Straight-Through) Cable 
 
 
 
• 5V DC, 1.2 A Power Adapter

 

        Using a power 

         supply with a 

different voltage rating 

will damage and void 

the warranty for this 

product. 

 

Before You Begin  

  

Summary of Contents for Express EtherNetwork DI-604+

















Reviews: