D-Link EXO DIR-1960 User Manual Download Page 84

Page: 84 / 159

D-Link DIR-1960 User Manual

Section 4 - Configuration

Upgrade

This page will allow you to upgrade the router’s firmware or language pack,

either automatically or manually. To manually upgrade the firmware or

language pack, you must first download the relevant file from

http://support.

dlink.com

In the Management menu on the bar on the top of the page, click

Upgrade

Firmware Information

Current Firmware

Version/Date :

The current firmware’s version and date will be displayed.

Check for New

Firmware:

Click this button to prompt the router to automatically check for a new

firmware version. If a newer version is found, it will prompt you to install it.

Upgrade Manually

Upgrade

Firmware:

If you wish to upgrade manually, first download the firmware file you wish

to upgrade to. Next, click the

Upgrade Firmware

button and browse to

the file to install the new firmware. You can also browse to a language

pack file to install a new language pack.

Summary of Contents for EXO DIR-1960
































































































































































Search results

Summary of Contents for EXO DIR-1960

Reviews:

Related manuals for EXO DIR-1960

Brands by name

Popular brands

D-Link EXO DIR-1960, User Manual

Search results

Summary of Contents for EXO DIR-1960

Reviews:

Related manuals for EXO DIR-1960

Brands by name

Popular brands