4 Configuration
D-Link Smart Managed Switch User Manual
36
priority classes.
IEEE 802.1p Default Priority Settings
From Port / To Port
Specify a range of ports to be configured.
Priority
Defines the priority level for the corresponding port. The priority
range is between 0 and 7 with 0 being assigned to the lowest
priority and 7 assigned to the highest.
DSCP Priority Settings
From DSCP Value / To
DSCP Value
Specify a range of DSCP values to be configured.
Priority
Defines the priority level for the corresponding port. The priority
range is between 0 and 7 with 0 being assigned to the lowest
priority and 7 assigned to the highest.
Table 4.29
Click
Apply
to make the configurations take effect.
QoS > Port Rate Limiting
This window is used to configure the transfer speed limit for a selection of ports.
Figure 4.50 - QoS > Port Rate Limiting
The fields that can be configured are described below:
Item
Description
From Port / To Port
Specify a range of ports to be configured.
Direction
Select the direction option. Options to choose from are:
•
Input:
This configures the transfer speed limit for
ingress traffic.
•
Output:
This configures the transfer speed limit for
egress traffic.
•
Both:
This configures the transfer speed limit for both
ingress and egress traffic.
Rate Limit
Specify the rate limit in kbps or Mbps. Or specify
No Limit
to
remove the rate limit.
Table 4.30
Click
Apply
to make the configurations take effect.
Security > Traffic Segmentation
This feature allows administrators to distribute traffic flow from a single port to a group of ports on a single
Switch. This method of segmenting the flow of traffic is similar to using VLANs to limit traffic, but is more
restrictive.
