DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
288
Click the
Apply
button to accept the changes made.
After clicking the
Please Select
button, the following window will appear:
Figure 8-18 ACL Interface Access Group (Please Select) Window
Select the radio button next to the entry to use that ACL in the configuration.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
Click the
OK
button to accept the selection made.
ACL VLAN Access Map
This window is used to display and configure the ACL VLAN access map settings.
To view the following window, click
ACL > ACL VLAN Access Map
, as shown below:
Figure 8-19 ACL VLAN Access Map Window
The fields that can be configured are described below:
Parameter
Description
Access Map Name
Enter the access map’s name here. This name can be up to 32 characters long.
Sub Map Number
Enter the sub-map’s number here. This value must be between 1 and 65535.
Action
Select the action that will be taken here. Options to choose from are
Forward
,
Drop
, and
Redirect
. When the
Redirect
option is selected, select the redirected
interface from the drop-down list.
Counter State
Select whether to enable or disable the counter state.
Click the
Apply
button to accept the changes made.
Click the
Clear All Counter
button to clear the counter information for all the access maps.
Summary of Contents for DXS-3400 SERIES
Page 1: ......
