4 Configuration
D-Link DXS-1210 Series User Manual
9
9
3
3
Trap State:
Select the storm control trap state. The options are
None
,
Storm Occur
,
Storm Clear
, and
Both
. When
None
is selected, no traps will be sent. When
Storm Occur
is selected, a trap notification will
be sent when a storm event is detected. When
Storm Clear
is selected, a trap notification will be sent when
a storm event is cleared.
Click the
Apply
button to save your settings.
Storm Control Polling Settings:
Interval (1-300):
Enter the interval value. The range is from 1 to 300.
Retries (0-360):
Enter the retry value. The range is from 0 to 360.
Click the
Apply
button to save your settings.
Storm Control Port Settings:
From Port / To Port:
Select the range of ports to be configured.
Type:
Select
the type of storm attack. The values are
Broadcast
,
Multicast
, and
Unicast
.
Action:
Select the action for the specified ports. The values are
None
,
Shutdown
and
Drop
.
Level Type:
Select the level type to be
PPS
or
Kbps
. When selected
PPS
. The
PPS Rise
&
PPS Low
will
be showed.
PPS Rise (1-2147483647):
Enter the rise packets per second value. The value is from 1 to
2147483647.
PPS Low (1-2147483647):
Enter the low packets per second value.
The value is from 1 to
2147483647.
Figure 4.158 – Security > Storm Control Settings-Kbps
When select the level type to be
Kbps
, the
Kbps Rise
will be showed, and
Kbps Low
will be disabled. And
the column
Current
of Storm Control information table will only show “-“.
Kbps Rise (1-2147483647):
Enter the rise packets per second value. The value is from 1 to
2147483647.
Kbps Low (1-2147483647):
The field is un-configured.
Click
Apply
for the settings to take effect.
Security > DoS Attack Prevention Settings
The DoS Attack Prevention Settings page allows you to view and configure the Denial-of-Service (DoS)
attack prevention settings.
Summary of Contents for DXS-1210 Series
Page 2: ......
Page 23: ...4 Configuration D Link DXS 1210 Series User Manual 1 17 7 Figure 4 24 User Guide Micro Site ...
Page 119: ......
