4 Configuration
D-Link DXS-1210 Series User Manual
28
string to access to the SNMP agent.
Click
Add
to a new entry based on the information entered or
Delete
to remove the specified entry.
Management > SNMP > SNMP Group Table Settings
The SNMP Group page allows you to assign SNMP Users into SNMP Groups. SNMPv3 can control access
and security policies on a per group basis
.
Figure 4.45 – Management > SNMP > SNMP Group Table Settings
Group Name:
Enter the SNMP user group of up to 32 characters.
User-based Security Model:
Select the SNMP security model.
SNMPv1 -
SNMPv1 does not support any security features.
SNMPv2c -
SNMPv2 supports both centralized and distributed network management strategies. It
includes improvements in the Structure of Management Information (SMI) and adds some security
features.
SNMPv3 -
SNMPv3 provides secure access to devices through a combination of authentication and
encrypting packets over the network.
Security Level:
This function is only available when you select SNMPv3 security level.
NoAuthNoPriv -
No authorization and no encryption for packets sent between the Switch and SNMP
manager.
AuthNoPriv -
Authorization is required, but no encryption for packets sent between the Switch and
SNMP manager.
AuthPriv –
Both authorization and encryption are required for packets sent between the Switch and
SNMP manger.
IP Address-List Name:
Read View Name:
Enter a SNMP group name for users that are allowed SNMP read privileges to the
Switch's SNMP agent.
Write View Name:
Enter a SNMP group name for users that are allowed SNMP write privileges to the
Switch's SNMP agent.
Notify View Name:
Enter a SNMP group name for users that can receive SNMP trap messages generated
by the Switch's SNMP agent.
Click the
Add
button to add a new entry based on the information entered.
Click the
Delete
button to remove the specified entry.
Management > SNMP > SNMP Engine ID Local Settings
The Engine ID is a unique identifier used to identify the SNMPv3 engine on the Switch.
Input the Engine ID then click
Apply
to apply the changes or click
Default
to change back to the default
value.
Summary of Contents for DXS-1210 Series
Page 2: ......
Page 23: ...4 Configuration D Link DXS 1210 Series User Manual 1 17 7 Figure 4 24 User Guide Micro Site ...
Page 119: ......
