D-Link DXS-1210 Series, User Manual

Page: 113 / 119

5 Command Line Interface
D-Link DXS-1210 Series User Manual
1 1 0 0 7 7
password.
Parameters <string <32>
− The name of the user.
privilege <short <1-15> - Specify the privilege level. The value 1
is for Basic user, 12 for Operator and 15 for Administrator.
password <string <32> - Specify the password.
Restrictions Only Administrator can issue this command.
Example usage:
To configure the account admin password:
DXS-1210-12TC> config account username dlink privilege 15 nopassword
DXS-1210-12TC>
save
Purpose To save changes in the Switch’s configuration to non-volatile
RAM.
Syntax save {startup-config | config-1 | config-2}
Description The save command saves the configuration changes to the
memory.
Parameters {startup-config | config-1 | config-2} – Specify to save the
configuration when startup configuration. Or specify to save the
configuration to specified image.
Restrictions None.
Example usage:
To save the Switch’s current configuration to config-1:
DXS-1210-12TC> save config-1
Success!
DXS-1210-12TC>
boot image
Purpose Specify to boot up the switch from which image.
Syntax boot image [image-1 | image-2]
Description The boot image command specifies to boot up switch from which
image.
Parameters None.
Restrictions Only Administrator can issue this command.
Example usage:
To boot up the switch from image-1:
DXS-1210-12TC> boot image image-1
Success!
DXS-1210-12TC>