D-Link DXS-1210 Series User Manual Download Page 103

Page: 103 / 119

4 Configuration

D-Link DXS-1210 Series User Manual

Figure 4.164 – Monitoring > Statistics > Port – Show Detail

Click the

Back

button to return to the previous window.

Click the

Refresh

button to refresh the display table.

Monitoring > Statistics > Port Counters

The Port Counters page allows you to display port counter statistics.

Figure 4.165 – Monitoring > Statistics > Port Counters

From Port / To Port:

Select the range of ports to be configured.

Click the

Find

button to locate a specific entry based on the information entered.

Click the

Refresh

button to refresh the display table.

Click the

Show Errors

button to see all error counters of the specific port.

After clicking the

Show Errors

button, the following page will appear.

Figure 4.166 – Monitoring > Statistics > Port Counters – Show Errors

Click the

Back

button to return to the previous window.

Click the

Refresh

button to refresh the display table.

Monitoring > Statistics > Counters

The Counters page allows you to display all port counters, and clear the port counters of the specified or all
ports.

Summary of Contents for DXS-1210 Series
























































































































Search results

Summary of Contents for DXS-1210 Series

Reviews:

Related manuals for DXS-1210 Series

Brands by name

Popular brands

D-Link DXS-1210 Series, User Manual

Search results

Summary of Contents for DXS-1210 Series

Reviews:

Related manuals for DXS-1210 Series

Brands by name

Popular brands