D-Link DXS-1210 Series User Manual
74
Click the
Find
button to display the specific entry.
Click the
Detail
button to view and configure more detailed settings for the IPv6 interface entry.
After clicking the
Detail
button, the following window will be appeared.
Figure 4.123 – L3 Features > IPv6 Interface - Detail
IPv6 State:
Select to enable or disable the IPv6 interface’s global state.
Click the
Apply
button to save your settings.
Static IPv6 Address Setting:
IPv6 Address:
Enter the IPv6 address for this IPv6 interface. Select the
EUI-64
option to configure an IPv6
address on the interface using the EUI-64 interface ID. Select the
Link Local
option to configure a link-local
address for the IPv6 interface.
Click the
Apply
button to save your settings.
NS Interval Settings:
NS Interval (1-3600):
Specify the NS interval and the values are between 1 and 3600.
Click the
Apply
button to save your settings.
After clicking the
Interface Address
tab located at the top of the page, the following page will appear
Figure 4.124 – L3 Features > IPv6 Interface – Interface IPv6 Address
After clicking the
DHCPv6 Client
tab located at the top of the page, the following page will appear
Figure 4.125 – L3 Features > IPv6 Interface – DHCPv6 Client
Click the
Restart
button to restart the DHCPv6 client.
Client State:
Select to enable or disable the DHCPv6 client state.
Click the
Apply
button to save your settings.
L3 Features > IPv6 Neighbor
The user can configure the Switch’s IPv6 neighbor settings. The Switch’s current IPv6 neighbor settings will
be displayed in the table at the bottom of this window.
