D-Link DXS-1210 Series User Manual
70
Figure 4.113 – L2 Features > LLDP > LLDP Neighbors Port Information
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Clear
button
to remove the specified port of LLDP neighbor port or click
Clear All
button to remove
all LLDP neighbor ports.
L3 Features > ARP > ARP Aging Time
The ARP Aging Time page allows you to view and configure the ARP aging time settings.
Figure 4.114 – L3 Features > ARP > ARP Aging Time
Timeout(min):
Specifies the aging time of the ARP entry. The default is 5 minutes.
Click the
Apply
button to save your settings.
Click the
Edit
button to re-configure the specific entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
L3 Features > ARP > Static ARP
The Static ARP page provides information regarding each interface, including the IP address mapped to a
MAC address. Enter an
IP Address
or
Hardware Address
and then click
Apply
to create a new ARP entry.
Figure 4.115 – L3 Features > ARP > Static ARP
Click
Edit
to modify the
Hardware Address
.
Click
Delete
to remove the information from ARP table.
Click
Delete All
to remove all information from ARP table.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
L3 Features > ARP > ARP Table
The ARP Table page allows you to view and configure the ARP table settings.
