Rack Installation
The switch can be mounted in a standard size 19-inch rack, which can be placed in a wiring closet with other
equipment. To install, attach the mounting brackets to the switch’s side panels (one on each side) and secure
them with the screws provided.
Then, use the screws provided with the equipment rack to mount the switch in the rack.
Connecting to Power
Power Failure
As a precaution, the switch should be unplugged in case of power failure. When power is resumed, plug the
switch back in.
Grounding the Switch
The following steps explain the procedure for connecting the switch to a protective ground:
1. Verify if the system power is off.
2. Using a screwdriver, tighten the ground screw to secure the ground cable to the switch.
3. Attach the terminal lug ring at the other end of the grounding cable to an appropriate grounding source.
4. Verify if the connections at the ground connector on the switch and the rack are securely attached.
4
Summary of Contents for DXS-1100-10TS
Page 17: ...17 Тел 7 4912 575 305 ...
