D-Link DWS-4026 User Manual Download Page 58

Page: 58 / 576

D-Link Unified Access System

Software User Manual

12/10/09

Page 58

System Description

Document

34CSFP6XXUWS-SWUM100-D7

Figure 9: Dual Image Status

•

Click

Refresh

to display the latest information from the router.

YSTEM

ESCRIPTION

After a successful login, the System Description page displays. Use this page to configure and view general device
information.

To display the System Description page, click

LAN >

Administration > System Description

in the navigation tree.

Table 4: Dual Image Status Fields

Field

Description

Unit

Displays the unit ID of the switch.

Image1 Ver

Displays the version of the image1 code file.

Image2 Ver

Displays the version of the image2 code file.

Current-active

Displays the currently active image on this unit.

Next-active

Displays the image to be used on the next restart of this unit.

Image1 Description

Displays the description associated with the image1 code file.

Image2 Description

Displays the description associated with the image2 code file.

Summary of Contents for DWS-4026
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DWS-4026

Reviews:

D-Link DWS-4026, User Manual, Page: 58 / 576

Search results

Summary of Contents for DWS-4026

Reviews: