D-Link DWS-4000 Series, Cli Command Reference

Page: 457 / 566

449
DHCP Server Commands
ip dhcp conflict logging
This command enables conflict logging on DHCP server.
no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
clear ip dhcp binding
This command deletes an automatic address binding from the DHCP server database. If “*” is specified, the bindings
corresponding to all the addresses are deleted.
<address>
is a valid IP address made up of four decimal bytes ranging
from 0 to 255. IP address
0.0.0.0
is invalid.
clear ip dhcp server statistics
This command clears DHCP server statistics counters.
clear ip dhcp conflict
The command is used to clear an address conflict from the DHCP Server database. The server detects conflicts using a
ping. DHCP server clears all conflicts If the asterisk (*) character is used as the address parameter.
show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP server. If no IP address is specified, the
bindings corresponding to all the addresses are displayed.
Default enabled
Format
ip dhcp conflict logging
Mode Global Config
Format
no ip dhcp conflict logging
Mode Global Config
Format
clear ip dhcp binding {<address> | *}
Mode Privileged EXEC
Format
clear ip dhcp server statistics
Mode Privileged EXEC
Default none
Format
clear ip dhcp conflict {<address> | *}
Mode Privileged EXEC
Format
show ip dhcp binding [<address>]
Modes • Privileged EXEC
• User EXEC