D-Link DWS-4000 Series, Cli Command Reference

Page: 400 / 566

D-Link Unified Switch CLI Command Reference
392
© 2009 D-Link Corporation. All Rights Reserved
show class-map
This command displays all configuration information for the specified class. The
<class-name>
is the name of an existing
DiffServ class.
If the class-name is specified the following fields are displayed:
If you do not specify the Class Name, this command displays a list of all defined DiffServ classes. The following fields are
displayed:
Example:
The following shows example CLI display output for the command.
(DWS-4026) #show class-map test
Class Name..................................... test
Class Type..................................... All
Class Layer3 Protocol.......................... ipv4
Match Criteria Values
---------------------------- -------------------------------------------
Protocol 99
Format
show class-map <class-name>
Modes • Privileged EXEC
• User EXEC
Term Definition
Class Name The name of this class.
Class Type A class type of all means every match criterion defined for the class is evaluated simultaneously and
must all be true to indicate a class match.
L3 Proto The Layer 3 protocol for this class. The Unified Switch currently only supports IPv4.
Match Criteria The Match Criteria fields are only displayed if they have been configured. Not all platforms support all
match criteria values. They are displayed in the order entered by the user. The fields are evaluated in
accordance with the class type. The possible Match Criteria fields are: Destination IP Address,
Destination Layer 4 Port, Destination MAC Address, Ethertype, Source MAC Address, VLAN, Class of
Service, Every, IP DSCP, IP Precedence, IP TOS, Protocol Keyword, Reference Class, Source IP
Address, and Source Layer 4 Port.
Values The values of the Match Criteria.
Term Definition
Class Name The name of this class. (Note that the order in which classes are displayed is not necessarily the same
order in which they were created.)
Class Type A class type of all means every match criterion defined for the class is evaluated simultaneously and
must all be true to indicate a class match.
Ref Class Name The name of an existing DiffServ class whose match conditions are being referenced by the specified
class definition.