D-Link DWS-4000 Series, Cli Command Reference

Page: 319 / 566

311
Client Association Status and Statistics Commands
C
LIENT
A
SSOCIATION
S
TATUS AND
S
TATISTICS
C
OMMANDS
The commands in this section provide views and management of all status and statistics for wireless clients. In addition to
commands to display data from the associated client perspective, this section includes commands to display a view of all
clients associated to a specific VAP, and to display a view of all clients associated to a specific SSID.
wireless client disassociate
This command initiates a request to disassociate a client associated to a managed AP specified by the client MAC address.
The Unified Switch will send a message to the appropriate managed AP to force the disassociation.
show wireless client status
This commands displays summary or detailed data for clients associated to a managed AP. If the Unified Switch is a Cluster
Controller, the command shows all the associated clients in the peer-group. When acting as a Cluster Controller, the peer
switch associated clients are displayed with an “*” (asterisk) before the Client MAC Address in the summary command.
The command output displays the following information.
Format
wireless client disassociate <macaddr>
Mode Privileged EXEC
Parameter Description
macaddr Client MAC address.
Format
show wireless client [<macaddr>] status
Mode Privileged EXEC
Parameter Description
macaddr Client MAC address.
Field Description
MAC Address The Ethernet address of the client station.
Detected IP
Address This is the IPv4 address detected for the clents using ARP snooping.
Tunnel IP Address This field is blank for all non-tunneled clients. For a tunneled client, this is the assigned tunnel IP
address.
Associating Switch Indicates if the client is associated to an AP managed by this Unified Switch or a peer Unified Switch.
Switch MAC
Address The Ethernet address of the Unified Switch associating this client.
Switch IP Address The network IP address of the Unified Switch associating this client.
SSID Indicates the network on which the client is connected.
NetBIOS Name NetBIOS name of the client.
VAP MAC Address Indicates the Ethernet MAC address for the managed AP VAP where this client is associated.