D-Link DWS-4000 Series, Cli Command Reference

Page: 296 / 566

D-Link Unified Switch CLI Command Reference
288
© 2009 D-Link Corporation. All Rights Reserved
wireless ap download image-type
This command sets a TFTP path and file name for the specified AP system type. The download request can be initiated for
all the image types or for a specific image type. Currently the D-Link UWS supports only one image type: for DWL-8600AP.
Example: The following shows an example of the command.
(DWS-4026) #wireless ap download image-type img_dwl8600 tftp://1.1.1.1/./ap/apcode.tar ?
<cr> Press Enter to execute the command.
wireless ap download group-size
This command sets the download group size. The switch requests the managed APs to download a new system image in
groups. By default the switch will request the download for 10 managed APs at a time.
Example: The following shows an example of the command.
(DWS-4026) #wireless ap download group-size 3
wireless ap download abort
This command aborts the AP image download process. If the process is aborted, the code download still continues on the
remaining APs in the current download group, but not on APs in the next download group.
wireless ap download start
This command initiates the AP image download process to (a) all managed APs running a specific image type, or to (b) one
or all managed APs irrespective of image type, to download a new system image based on the configured TFTP URL. The
download is not started if the filename for the requested image type is not configured.
Default None
Format
wireless ap download image-type img_dwl8600 <url>
Mode Privileged EXEC
Parameter Description
img_dwl8600 The image type.
url TFTP file path for an AP system image.
Default 10
Format
wireless ap download group-size <1-64>
Mode Privileged EXEC
Parameter Description
1-64 Enter the number of APs.
Format
wireless ap download abort
Mode Privileged EXEC