D-Link DWS-4000 Series, Cli Command Reference

Page: 144 / 566

D-Link Unified Switch CLI Command Reference
136
© 2009 D-Link Corporation. All Rights Reserved
The table contains the following column headings:
show lldp remote-device
Use this command to display summary information about remote devices that transmit current LLDP data to the system. You
can show information about LLDP remote data received on all ports or on a specific port.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show lldp remote-device all
LLDP Remote Device Summary
Local
Term Definition
Last Update The amount of time since the last update to the remote table in days, hours, minutes, and seconds.
Total Inserts Total number of inserts to the remote data table.
Total Deletes Total number of deletes from the remote data table.
Total Drops Total number of times the complete remote data received was not inserted due to insufficient
resources.
Total Ageouts Total number of times a complete remote data entry was deleted because the Time to Live interval
expired.
Term Definition
Interface The interface in slot/port format.
Transmit Total Total number of LLDP packets transmitted on the port.
Receive Total Total number of LLDP packets received on the port.
Discards Total number of LLDP frames discarded on the port for any reason.
Errors The number of invalid LLDP frames received on the port.
Ageouts Total number of times a complete remote data entry was deleted for the port because the Time to Live
interval expired.
TVL Discards The number of TLVs discarded.
TVL Unknowns Total number of LLDP TLVs received on the port where the type value is in the reserved range, and
not recognized.
Format
show lldp remote-device {<slot/port> | all}
Mode Privileged EXEC
Term Definition
Local Interface The interface that received the LLDPDU from the remote device.
RemID An internal identifier to the switch to mark each remote device to the system.
Chassis ID The ID that is sent by a remote device as part of the LLDP message, it is usually a MAC address of
the device.
Port ID The port number that transmitted the LLDPDU.
System Name The system name of the remote device.