D-Link DWS-1008 User Manual
8
Resetting the Update Interval to the Default
To reset the update interval to the default value, use the following command:
clear ntp update-interval
Enabling the NTP Client
The NTP client is disabled by default. To enable the NTP client, use the following command:
set ntp {enable | disable}
Displaying NTP Information
To display NTP information, use the following command:
show ntp
Here is an example:
DWS-1008>
show ntp
NTP client: enabled
Current update-interval: 20(secs)
Current time: Sun Feb 29 2004, 23:58:12
Timezone is set to ‘PST’, offset from UTC is -8:0 hours. Summertime is enabled.
Last NTP update: Sun Feb 29 2004, 23:58:00
NTP Server Peer state Local State
--------------------------------------------------
192.168.1.5 SYSPEER
SYNCED
The Timezone and Summertime fields are displayed only if you change the timezone or enable
summertime.
Summary of Contents for DWS-1008
Page 1: ......