DWR-980
Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Configuring via Web-based Interface
Using WPS Function without Web-based Interface
You can use the WPS function without accessing the web-based interface of the router. To do this,
you need to configure the following router's settings:
1. Specify relevant security settings for the wireless network of the router.
2. Click the
ENABLE
WPS
button.
3. Save the settings and close the web-based interface (click the
Logout
line of the menu).
Later you will be able to add wireless devices to the WLAN by pressing the
WPS
button of the
router.
1. Select the PBC method in the software of the wireless device that you want to connect to the
router's WLAN.
2. Click the relevant button in the software or press the WPS button on the cover of the
wireless device that you want to connect to the WLAN.
3. Press the
WPS
button of the router, hold it for 2 seconds, and release. The
2.4GHz
and
5GHz
LEDs will start blinking.
Page
143
of 266
