DWR-980
Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Configuring via Web-based Interface
Creating LTE WAN Connection
If the PIN code check is enabled for the SIM card inserted into the built-in modem, then prior to
creating an LTE WAN connection, go to the
LTE Modem
menu and enter the PIN code on the page
section, page 169). Then go to the
Connections Setup / WAN
page and click the
ADD
button (
) in the
Connections List
section. On the opened page, go to
the
All Settings
tab. Then select the relevant value from the
Connection Type
drop-down list
and specify the needed values.
Figure 93. The page for creating a new
LTE
connection. Selecting a connection type.
Parameter
Description
Enable connection
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Connection name
A name for the connection for easier identification.
Page
118
of 266
