D-Link DWR-956M User Manual Download Page 84

Page: 84 / 132

Applications

Storage Service

The Applications menu is used to set application settings on the DWR-956M.

Storage Device Info

This displays information about any attached external USB storage devices.

Storage Service - File Sharing Service Setup

This is used to enable or disable the Samba file sharing service.

Storage Service - File Sharing Service Setup

Enable Samba Service: Whether to enable or disable the Samba service.
Tick this to enable the Samba service.
Click

Apply

to apply the settings and click

Refresh

to refresh the page.

Storage Service - FTP Service Setup

This is used to enable or disable the FTP server service.

Storage Service - FTP Service Setup

Enable FTP Service: Whether to enable or disable the FTP service. Tick this to
enable the FTP service.
FTP Directory: The directory to make available for use by the FTP service.
Click

Apply

to apply the settings and click

Refresh

to refresh the page.

Summary of Contents for DWR-956M





































































































































Search results

Summary of Contents for DWR-956M

Reviews:

Brands by name

Popular brands

D-Link DWR-956M, User Manual

Search results

Summary of Contents for DWR-956M

Reviews:

Brands by name

Popular brands