40
D-Link DWR-712 User Manual
Section 3 - Configuration
OUTBOUND FILTER SETTING
Select this box to
Enable
outbound filtering.
Select a schedule to use and copy to the specified rule ID
when you click the
Copy to
button. You may select
Always On
or use a specific schedule that you have defined. To create and
edit schedules, please refer to “Schedules” on page 55.
OUTBOUND FILTER RULES LIST
Here, you can select whether to Allow or Deny all outgoing
traffic except for traffic that matches the listed rules.
This identifies the rule.
Specify the local IP address and then specify the port after the
colon.
Specify the remote IP address and then the port after the
colon.
Tick the checkbox to enable the specified rule.
Specify the schedule rule number.
Go back to the previous filter page.
Advance to the next filter page.
Outbound Filter
Outbound Filter:
Use Schedule Rule:
ID:
Source IP : Ports:
Destination IP : Ports:
Enable:
Schedule Rule #:
Previous Page:
Next Page:
Outbound Filter
enables you to control what packets are allowed to be sent out to the Internet. The outbound filter applies to all outbound packets.
After modifying any settings, click
Save Settings
to save your changes.
Summary of Contents for DWR-712
Page 1: ...USER MANUAL ...
