D-Link DWR-712, User Manual

Page: 28 / 89

24 D-Link DWR-712 User Manual
Section 3 - Configuration
Select this checkbox to enable wireless access. When you set
this option, the following parameters take effect.
Also known as the SSID (Service Set Identifier), this is the name
of your Wireless Local Area Network (WLAN). Enter a name
using up to 32 alphanumeric characters. The SSID is case-
sensitive.
B/G mixed: Enable this mode if your network contains a mix of
802.11b and 802.11g devices.
N only:
Enable this mode if your network only has 802.11n
devices.
B/G/N mixed:
Enable this mode if you have a mix of 802.11n,
802.11g, and 802.11b clients.
Enabling this feature will allow the router to scan for the best
channel to use automatically.
A wireless network uses specific channels in the wireless
spectrum to handle communication between clients. Some
channels in your area may experience interference from
other electronic devices. Choose the clearest channel to help
optimize the performance and coverage of your wireless
network, or enable Auto Channel Scan for the router to
automatically select the best channel.
This setting determines whether the SSID will be Visible or
Invisible
to wireless clients looking for wireless networks.
Setting this to Invisible can increase the security of your
network by hiding it, but clients will need to manually enter
the SSID of your network to connect.
Enable Wireless:
Wireless Network Name:
802.11 Mode:
Auto Channel Scan:
Wireless Channel:
Visibility Status:
Wireless Settings
This page lets you set up your wireless network and choose a wireless security mode. After modifying any settings, click Save Settings to save your
changes.