17
D-Link DWR-712 User Manual
Section 3 - Configuration
PPTP
Choose this Internet connection if your ISP provides you PPTP account. After modifying any settings, click
Save Settings
to save your changes.
Choose Static IP only if your ISP assigns you an IP address.
Otherwise, please choose Dynamic IP.
Enter the information provided by your ISP.
(Only applicable for Static IP PPTP.)
Enter the information provided by your ISP.
(Only applicable for Static IP PPTP.)
Enter the information provided by your ISP.
(Only applicable for Static IP PPTP.)
IP address of PPTP server.
User/account name that your ISP provides to you for PPTP dial-
up.
Password that your ISP provides to you for PPTP dial-up.
Fill in with the same password in Password field.
Choose
Always-on
when you want to establish PPTP
connection all the time. If you choose
Connect-on-demand
,
the device will establish PPTP connection when local users
want to surf Internet, and disconnect if no traffic after time
period of Maximum Idle Time.
The time of no activity to disconnect your PPTP session. Set it
to zero or choose Always-on to disable this feature.
Address Mode:
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway IP
Address:
PPTP Server IP Address:
Username:
Password:
Verify Password:
Reconnect Mode:
Maximum Idle Time:
Summary of Contents for DWR-712
Page 1: ...USER MANUAL ...
