D-Link DWR-512, User Manual

Page: 31 / 88

26 D-Link DWR-512 User Manual
Section 3 - Configuration
Select whether to use
WPA2 only
or
WPA
only
.
WPA2 only
is the most secure, provided
that all of your clients can support it.
Select whether to use the
TKIP
or
AES
cipher.
The AES cipher is the most secure, provided
that all of your clients can support it.
Enter the key/password you want to use for your
wireless network. The key must be 8 to 63 characters
long, and may only contain letters and numbers.
WPA Mode:
Cipher Type:
Network Key:
If you choose WPA-Personal , the following options will appear:
Select whether to use Open or Shared authentication.
Select whether to use 64-bit or 128-bit encryption.
Select which WEP key (1-4) to use as the default
key. This will also change the WEP Key text box
to that WEP key for your to configure(1-4).
Set the WEP key/password for your wireless network.
Based on whether you are using 64 or 128-bit encryption,
and whether you are using a HEX or ASCII key, you
will need to enter different numbers of characters for
your key, as indicated below the WEP Key text box.
ASCII keys may use letters and numbers only, and
HEX keys may use numbers 0-9 and letters A-F only.
Authentication:
WEP Encryption:
Default WEP Key:
WEP Key:
If you choose WEP , the following options will appear: