Section 7 – Settings
D-Link DWR-2101 User Manual
18
Configure Your 2.4 GHz Wi-Fi Settings
Press the power button to wake up your screen.
Slide your finger across the indicator to unlock your screen. If you've set a password to unlock your device, you'll need to enter it to proceed.
Swipe your display to navigate to Settings on your homescreen.
Tap
Settings
.
Tap
WiFi 2.4 G
.
To enable the 2.4 GHz Wi-Fi, tap
WiFi Enable
. The SSID for the 2.4 GHz Wi-Fi will now show up for your devices as a network to connect to.
The Bandwidth menu allows you to change the channel width being used by your DWR-2101. A wider megahertz channel may increase
performance, but could cause interference with other Wi-Fi devices. To change the bandwidth to use for your wireless network:
a.
Tap
Bandwidth
.
b.
Choose between
20 MHz
or
20/40 MHz
bandwidth.
c.
Tap to save.
To hide your SSID from Wi-Fi search results, tap
Hide SSID
.
