D-Link DWR-113, Manual

Page: 13 / 47

Step 3: Click on the Setup tab at the top of the page and click Network SeOngs from the
menu on the leg-­‐hand side.
Step 4: Under Router SeOngs, enter the desired IP address for your router. The IP Address
configured here is the IP address used to access the web-­‐based management interface. If
you change the IP address here, you may need to adjust your PC´s network seOngs in order
to access the network again, and you will need to enter the new IP address in order to
access the router’s web-­‐based configuraLon interface.
Step 5: Click on Save SeDngs .
5. How do I change the 802.11 mode on my router?
Example: If your device only supports 802.11b or 802.11g and it can’t connect to the router
then you can try to change the 802.11 mode to solve the problem. If your devices all use the
same 802.11 standard, you can set an ‘only’ mode to improve performance.
Step 1: Open an Internet browser (such as Internet Explorer) and enter h=p://192.168.0.1
into the address bar. Press Enter.