D-Link Smart WLAN Manager User Manual
D-Link Corporation
Wireless Configuration
B/G Mode -
Select if you want to include both 802.11b and 11g devices
(
Mixed
), or only 802.11b (
B_only
), or 802.11g (
G_only
) device on the
network.
Wireless Radio –
Select to turn the radio wave
On or Off
.
Wireless Network Name (SSID) -
The Service Set Identifier of the wireless
network.
Channel -
Allows you to manually choose a channel. It’s only selectable when
Auto Channel Scan
is disabled.
Auto Channel Scan -
Select this option to allow the channel to be decided
automatically.
Super G Mode -
Select this option to enable the wireless signal rate of up to
108Mbps. You can choose with or without Turbo mode. (
Note
: You can only
choose Super G or B/G mode for AP, these two mode cannot be enabled at
the same time.)
WMM –
Select to
Enable
or
Disable
the Wi-Fi Multimedia (WMM) function.
Enabling this feature will improve the user experience for multimedia
application if the wireless device supports WMM as well.
SSID Broadcast –
Select to
Enable
or
Disable
the broadcast of the SSID.
Security -
Select the security setting of the network. The available
authentication mechanisms include:
Disable
(default)
WEP
23
WPA
Summary of Contents for DWL-3140AP - Web Smart PoE Thin Access Point
Page 1: ...Version 1 00 May 2007...
