D-Link DWC-1000 User Manual Download Page 93

Page: 93 / 390

D-Link DWC-1000 User Manual

Section 4 - Advanced WLAN Configuration

WLAN Visualization

WLAN Visualization is a tool that provides a graphical representation of the wireless network through a Web

browser. The WLAN Visualization graph does not have a background image of its own, and so the administrator

can upload a static graphic image that provides the wireless topology of the APs and controllers in the wireless

network.

Upload Images

Path: Wireless > General > WLAN Visualization

User can upload one or more images, such as your office floor plan, to provide customized information for

the WLAN Visualization feature. Images file formats that are recommended to upload should be in one of the

following formats:

• GIF (Graphics Interchange Format)
• JPG (Joint Photographic Experts Group)

It is also recommended that you do not use color images since the WLAN components might not show up well.

Once user uploads an image file and save the running configuration, the image remains on the controller and

you can assign it to an existing graph using the WLAN Deployment application.

Deleting Images

This option is available only if images are already loaded onto the controller. To delete all images loaded onto

the controller, click

Delete All Images

. Deleting background images is not recommended. However, if the user

deletes the images, the user has to refresh the WLAN Visualization tool after deleting images.

Summary of Contents for DWC-1000







































































































































































































































































































































































































Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands

D-Link DWC-1000, User Manual

Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands