Ver 1.00(FB)_90x130 2022/02/08
Set-up
1
/
Drivers
Download
oculus.com/setup
I
I
Use these tips to get the best performance
• In the same room as the VR headset
• Line of sight (unobstructed view between
VR Air Bridge and VR headset)
• Desk height
• Keep the VR Air Bridge vertical using the
companion stand
Best placement for VR Air Bridge
Support
For more information about PC compatibility
requirements with Quest headsets, please visit
support.oculus.com
For additional support, go to:
https://support.dlink.com
Quick Start Guide
x1
x1
x 1
DWA-F18
VR Air Bridge
Powered by Quest Link Software
Contents in the box
Go to
oculus.com/setup
to download and
install the Quest Link Software. For those
who have the software already, ensure you
are running the most recent version, if not,
update and reboot your computer.
2
/
Connect the VR Air Bridge to a USB 3
port on your computer (they are blue).
Open the Quest Link Software and check
that VR Air Bridge is detected
FCC INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
Federal Communication Commission (FCC)
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
For products available in the USA/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter. This equipment should be installed and
operated with a minimum distance of 0.5 centimeters between the radiator
and your body.
For Portable Device Usage
Radiation Exposure Statement:
