ENGLISH
1
Quick Install Guide
Thank you for purchasing the DWA-171. Follow the easy steps in this guide to
properly set up your adapter. Please verify that all the package contents listed
below are available.
Quick Install Guide
If any of the above items are missing, please contact your reseller.
• An available USB port
• Windows® 8, 7, Vista® or XP (32/64-bit)
• An 802.11ac, 802.11n, or 802.11g wireless network
• 20MB free hard drive space
• CD-ROM Drive
Before installing your new D-Link wireless adapter, please verify the following:
• Remove any previous installations of wireless adapters.
• Disable any built-in wireless and/or Ethernet adapters.
• Verify the settings such as the wireless network name (SSID) and security
settings of the network(s) you want to connect to.
• You can download the latest driver from
http://www.dlink.com/DWA-171
.
WARNING: Do NOT plug the adapter into your computer before installing
the drivers. You will be prompted to plug in your adapter during the setup.
Note:
If the CD Autorun function does not automatically start on your computer, go
to
Start
>
Run
. In the run box type “D:\autorun.exe” (where D: represents the drive
letter of your CD-ROM drive) and click
OK
.
The drivers will now be installed. This process may take a minute to complete.
Once the
InstallShield Wizard Complete
screen appears, the DWA-171 has
been successfully installed. Click
Finish
to exit the Install Wizard.
Having trouble installing your new product? D-Link’s website contains the latest user
documentation and software updates for D-Link products. U.S. and Canadian customers can
contact D-Link Technical Support through our website.
©2013 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the
property of their respective owners. Maximum wireless signal rate derived from IEEE Standards 802.11ac (draft), 802.11n, 802.11a,
and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume
of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
conditions will adversely affect wireless signal range. Product specifications, size and shape are subject to change without notice,
and actual product appearance may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more
details.
United States
Internet:
http://support.dlink.com
Canada
Internet:
http://support.dlink.ca
Version 1.0 | February 21, 2013 29072600D171A11
DWA-171 Wireless AC Dual Band USB Adapter
CD with drivers and manual
Before You Begin
Installation
Package Contents
System Requirements
Insert the DWA-171 Driver CD into the CD-ROM drive. When the autorun
screen appears, click
Install
and follow the on-screen instructions.
2
3
4
5
Connect to Your Wireless Network
6
Click the
Wireless Networks
icon in the bottom-
right of the screen to bring up the list of available
networks.
Select the wireless network you would like to
connect to from the list and click the
Connect
button. It may take a minute while the connection
is established.
If the wireless network you are connecting to has
security (encryption) enabled, enter the security
password and click
Next
to continue.
Note:
The password is case-sensitive and must be
typed in exactly the same as on your wireless router
or access point.
2
3
1
You are now connected to your wireless network.
5V - - - 3A
1
2 LAN 3
4
INTERNET
USB
RESET
INTERNET
Press the
WPS
button (or launch the WPS
process) on your wireless router or access
point. Please consult your router or access
point’s user manual on how to start the WPS
process.
Connect to your wireless network using the
WPS button setup
method.
Within two minutes, press the
WPS
button on
your DWA-171 adapter.
Within two minutes your adapter will be securely connected to your wireless
network.
2
3
1
Technical Support
Select the language you want the setup wizard to display. Click
Next
to
continue.
The Welcome screen will appear. Click
Next
to continue.
You will now be asked to plug the DWA-171 adapter into an available USB
port. Once you plug it in, click
Install
to continue.
There are two ways to connect to a wireless network:
A. WPS Setup
- Use if your wireless router supports WPS (Wi-Fi Protected Setup).
Simply press the WPS button on your adapter and your router to automatically
configure and connect.
B. Wireless Utility
- Use the built-in wireless utility to display a list of wireless
networks. Select the network and connect.
A. WPS Setup
B. Wireless Utility
Wireless AC Dual Band USB Adapter
DWA-171
