32
D-Link DVA-2800 User Manual
Section 4 - Configuration
WAN Access Type:
Select
USB
to configure USB connection settings.
Interface:
Select the interface from the drop-down menu.
Enable Interface:
Select whether to enable or disable this interface.
ISP Settings
Country:
Select your country.
ISP:
Select your ISP. A number of ISP configuration settings are pre-
programmed into the DVA-2800 for convenience. If you don't see
your ISP or wish to use manual settings, choose
Not Listed.
PIN Code:
Enter your PIN code.
Dial Number:
Enter the Dial Number.
APN:
Enter the APN.
Username:
Enter your username.
Password:
Enter your password.
If you need to configure DHCP, see
Save
when
you are done.
The DVA-2800 supports USB mobile broadband adapters. You can connect a mobile
broadband adapter and share your cellular network connection with your home network.
For a list of supported adapters, visit
www.dlink.com
.
This page provides configuration settings for your USB mobile broadband connection.
Refer to your mobile broadband adapter's documentation for setup instructions and ISP
for configuration information. In most cases, the process is plug and play and requires no
further configuration.
USB
