Installation
Connect the power adapter to the
power connector on the back of the
DUB-1340, then plug the power adapter
into a power outlet.
1
2
3
Connect the other end to the USB 3.0
port on your computer.
Alternatively, you may use a USB 2.0
Standard-A to USB 2.0 Micro-B cable to
connect the hub to your computer. In
this case, you will only be able to use
the DUB-1340 as a USB 2.0 hub.
Connect the included USB 3.0 cable
to the connector on the back of the
DUB-1340.
Note:
Please make sure that the power draw requirements for devices connected to the DUB-1340 do not
exceed 2.1 A for a single port, or 3.2 A total for all connected devices.
4
You may now connect your USB devices to the hub. It is recommended
to connect them one at a time and allow your computer to recognize
the device.
5
EN
G
LIS
H
