D-Link DSR-500, User Manual

Page: 40 / 213

Unified Services Router User Manual
38

For finer control, the Rate profile type can be used. With this option the
minimum and maximum bandwidth allowed by this profile can be limited.

Choose the WAN interface that the profile should be associated with .
Figure 20 : Ba ndwidt h Prof ile Co nf igurat ion page
Advanced > Advanced Network > Traffic Management > Traffic Selectors
Once a profile has been created it can then be associated with a traffic flow from the
LAN to WAN. To create a traffic selector, click Add on the Traffic Selectors page.
Traffic selector configuration binds a bandwidth profile to a type or source of LAN
traffic with the following settings:

Available profiles: Assign one of the defined bandwidth profiles

Service: You can have the selected bandwidth regulation apply to a specific
service (i.e. FTP) from the LAN. If you do not see a service that you want, you
can configure a custom service through the
Advanced > Firewall Settings >
Custom Services
page. To have the profile apply to all services, select ANY.

Traffic Selector Match Type: this defines the paramete r to filter against when
applying the bandwidth profile. A specific machine on the LAN can be
identified via IP address or MAC address, or the profile can apply to a LAN
port or VLAN group. As well a wireless network can be selected by its BSSID
for bandwidth shaping.