D-Link DSR-250N User Manual Download Page 148

Page: 148 / 221

Unified Services Router

User Manual

146

Fig ur e 100: List of c ur re nt Act ive VPN S essions

All active SSL VPN connections, both for VPN tunnel and VPN Port forwarding, a re
displayed on this page as well. Table fields are as follows.

Field

Description

User Name

The SSL VPN user that has an active tunnel or port forwarding session to this
router.

IP Address

IP address of the remote VPN client.

Local PPP Interface

The interface (WAN1 or WAN2) through which the session is active.

Peer PPP Interface IP

The assigned IP address of the virtual network adapter.

Connect Status

Status of the SSL connection between this router and the remote VPN client: Not
Connected or Connected.

Summary of Contents for DSR-250N





























































































































































































































Search results

Summary of Contents for DSR-250N

Reviews:

Related manuals for DSR-250N

Brands by name

Popular brands

D-Link DSR-250N, User Manual

Search results

Summary of Contents for DSR-250N

Reviews:

Related manuals for DSR-250N

Brands by name

Popular brands