D-Link DSR-250, Cli Reference Manual

Page: 17 / 83

Unified Services Router CLI Reference Guide
15
Chapter 6. Utility commands used in
CLI
The command util ? at the CLI prompt would give the description of all the utility commands in
the branch util, which is as follows:
Sl No Command Name Purpose
1 util ping Ping or Trace an IP Address.
2 util restore_factory_defaults Revert to factory default settings.
3 util reboot Reboot the system
6.1 util ping <ip_address>
Sl No Command Name Description Type and Description
1 ip_address Ping target IP address. IP Address,
Ping target IP address.
6.2 util system_check capturePackets
Sl No Command Name Description Type and Description
1 download Download the packet capture to the
host machine Download the packet capture to the
host machine
2 Start Start the packet capture Specify the interface (WAN1,
WAN2 and LAN)
3 Stop Stop the packet capture
6.3 util system_check
Sl No Command Name Description Type and Description
1 display_IPV4_routingtable Display IPV4 Routing Table Display IPV4 Routing Table
6.4 util system_check dns_lookup
Sl No Command Name Description Type and Description
1 dns Internet name String
IP address
DNS
6.5 util system_check traceroute
Sl No Command Name Description Type and Description
1 ip_address It displays all the routers present String