58
D-Link DSL-G2452DG User Manual
Section 4 - Configuration
IPv6
To configure IPv6 rules, on the Static Routes page click
IPv6
. To return to the main IPv4 static
routes page, click
IPv4
.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish
to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule,
click the
Add Rules
button. Click
Save
when you are done. If you edit or create a rule, the
following options will appear:
Create New Rule
DestNetwork:
This is the IP address of the router used to reach the specified
destination.
PrefixLen:
Enter the IPv6 address prefix length of the packets that will take this
route.
Gateway:
Enter your next hop gateway to be taken if this route is used.
Metric:
The route metric is a value from 1 to 16 that indicates the cost of using
this route. A value 1 is the lowest cost and 16 is the highest cost.
Interface:
Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click
Apply
and
Save
when you are done.